DIY 1TB Network Attached Storage inside a UPS!
මේ දවසවල මගේ පරණ NAS (Network Attached Storage) එක වෙනුවට NAS Box එකක් ගන්න කියලා හිතුනා, මොකද තියේන්නේ අලි යෙක් වගේ computer එකක්. එකක් ගන්න ඉතින් ලංකාවේ හෙවිවා හෙවිවා නෑ, ඉතින් ඔහොම ඉන්නකොට bud දවසක් මට twitter එකේ කිවුවා එක තැනක තියනවා කියලා. එතන තිබුනා Synology කියන සමාගෙමෙන් හදන 209J කියන මාදිලියේ එකක්, මිල රු.39,000 ක්, මේ කියනේ hard disk නැතුව. මෙචර ගානක් දීලා මේක ගන්න එක කිසිම තේරුමක් නෑ කියලා සිතුනා.
ඔහොම හිතනකොට ආවා අදහස්ක් මගේ පරණ UPS එකක් තිබුනා, මේක ඇතුලේ NAS එකක් හදාගන්න පුරුවන්නම් මරු නේද කියලා. මොකද නියම සයිස් එක නේ, වැඩි ඉඩක් යන්නේ නෑ නේ.
නොදන්න අයට බලමු මොකද මේ NAS නොහොත් Network Attached Storage එකක් කියන්නේ කියලා, මේක හරියට Network (LAN) එකට හයි කරපු hard disk එකක් වගේ, ඕනෑම පරිගණකය සිට සම්බන්දවෙලා දත්ත copy කරන්න share කරන්න පුලුවන්. File Server එකක් වගේ, ඒත් file server කියන්නේ ටිකක් hardware ඕන, වැඩි ඉඩක් යන දේවල් නේ. NAS වල file sharing විතරක් නොවෙයි, Audio/Video Streaming කරන්න, backup කරන්න වගේම මේ හදපු එකේ Torrent උතන් download වෙන්න දාන්න පුලුවන්. ;) විදුලිය වැඩිය යන්නෙත් නෑ නේ!
මේවගේ වටිනාකම තමයි, අඩු විදුලියක් වැය වීම, රත්වීම අඩුවීම, boot වෙන්න ගතවෙන කාලය අඩුවීම, අඩු ඉඩ ප්රමාණයක් යන එක, maintenance ගොඩක් අඩු වීම වගේ දේවල් තියනවා.
මම මේ NAS එක හදන්න 1.2KV UPS එකක් හා Intel Atom 1.6 Mini-ITX motherboard එකක් (රු.7500), 512MB RAM (රු.1500) එකක්, ATX 250W Power Supply (රු.1500) එකක් 1GB USB Pen Drive (රු.1250) එකක් (පසුව මේක CF වලට මාරු කරනව) හා 1TB hard disk (රු.12,500×2) දෙක්කක් යොදාගත්තා.

මෙන්න තියනවා UPS එක, මේකේ ඔක්කොම කෑලී ගලවා ඉවත් කරා. සුද්ද කරා.

පොඩිඩක් යකට කෑලී එක්ක ඔට්ටු වෙලා, කැපීමකින් පසුව Hard Disk දෙක දෙපැත්තට mount කරා, පොඩි අලයක් උනේ Mini-ITX motherboard එක සවි කරන්න ගියහම, මේකට හේතුව උනේ motherboard එක පොඩක් උස වැඩියි, ඒක නිසා ඒකට පොඩි bracket හදලා පොඩ්ඩක් ඇල කරලා සවි කරන්න සිදු උනා.

UPS එකේ තිබුනා network protection එකක්, ඒකේ RJ45 jack එක වගේම FAN, Power Input එහම තියලා වයර් ගලවලා හරියට සවි කරා, ATX Power Supply එකත් ගලවන්න උනා, ගලවල මදේ විතරක් ගානට FAN එක එන විදියට සවිකරා, මතක තියාගන්න power supply එක සෙල්ලම් කරන එක අනතුරු දායකයි.

ඔන්න ඔකොම සවිකිරීමෙන් පසුව, RJ45 cable එකක් කපලා එක කොනක් UPS එකේ තිබුන network පොර්ට් එකට solder කරලා අන්ත් පැත්ත motherboard එකේ RJ54 (Network port) එකට සවි කරා.
NAS එකේ OS එක සදහා මම යොදාගත්තේ FreeNAS කියන FreeBSD වලින් පැවත් එක එකක්, මේක based වෙලා තියෙන්නේ mOnOwall කියන එක අනුව. FreeBSD කියන්නේ ලිනක්ස් නම් නොවෙයි, ඒක Unix වලින් පැවත එන එකක්. Open Source නම් තමයි.
දැනට Hard Disk දෙකක් යොදාගන්නේ RAID කිරීම සදහා, ඒ කියන්නේ RAID-1 පලමු hard disk එක වගේම එකක් දෙවන hard disk එකේ හැදෙනවා, ඒ කියන්නේ දෙකම 100% දත්ත වලින් සමාණයි. මේසදහා මම FreeNAS වල එන SoftwareRAID එක තමයි යොදාගත්තේ. මතක තියාගන්න මම 1TB hard disk දෙකක් යොඅදාගත්තට දාරිතාව වන්නේ 1TBම තමයි, මොකද RAID (Mirror) වෙන නිසා. FreeNAS boot කරනේ නම් USB Pen එක හරහා, මේක කරන්නේ ඉක්මනට boot වෙන්න හා පහසු නිසා, FreeNAS සදහා හොදටම 64mb ඉඩක් ඇති. මේ සදහා keyboard, monitors කිසි දෙයක් ඕනේ නෑ, Install කරන්න විතරයි ඕනේ.
මෙන්න FreeNAS boot වෙනවා.

මෙන්න මගේ UPS ඇතුලේ දුවන NAS එක
ඉදිරි පැනල් එකේ LED හා Power Button එහම හරියට වයර් කරා motherboard එකට, පිටුසට USB Port එකකුත් සවි කරා.
මොනවද මේකේ තියන පහසු කම්….
RAID-1
මේකෙන් දත්ත සුරැකිව hard disk බිද වැටීමකින් ආරාක්ෂාවෙන්නෙ පුලුවන්.
SMB/Windows File Sharing, FTP, AFP, NFS
Windows, Linux හා MAC එක්ක File Share කිරීම.
Web Server with PHP
PHP/Apache Web Server එකක්.
DAAP/UPnP (DLNA, PS3, Xbox 360)
NAS එකේ ඇති Audio/Video file ඕනෑම device එකක් සිට ඇසීමේ හැකියාව, copy නොකර iTunes, Winamp, PS3, Xbox 360 වගේ ඒවා එක්ක NAS එකේ ඇති play list පවා play කිරීමේ හැකියාව. මේක ගොඩක් පහසුයිනේ පරිගනක කිපයක් තියනකොට.
Torrent Download
මේක ගැන කියන්න දෙයක් නෑනේ, මේක ඉදන් torrent download කරන්න උවද පුලුවන්.
තව ගොඩක් දේවල් තියනවා.
රු.39000 + 25,000 යනවා කියපු එක, රු. 25,000 + 13,000 මුදලකින් සාදාගත්තා.






October 6th, 2009 at 10:30 pm
මේකේ කියලා කරලා තියෙන ඒවා නම් මට නොතේරේ…
ඒවුනාට කරලා තියෙන වැඩේ නම් නියමයි වගේ…
Anwayzzz gud work, keep it up…
October 6th, 2009 at 10:35 pm
නියමයි. මගෙත් වැඩකරන්නෙ නැති ups එකක් නම් තියෙනව. මොකක්හරි කරන්න හිතයි
October 6th, 2009 at 10:41 pm
@Anu
හික්… හික්…
@Malinthe
ඇයි බල බලා ඉන්නේ හදමු එකක් !
October 6th, 2009 at 10:47 pm
ටිප් ටොප් වැඩක් එල එල!
October 6th, 2009 at 10:52 pm
Pen එක කවුරු හරි ඇද්දොත් OS එක ඉවරයි නේද? :O
ඕකෙ IP Address එහෙම කොහොමද එතකොට? :)
October 6th, 2009 at 11:17 pm
ඔලුව කැරකෙනවා ඇම්බර් පෙට්ටියක තරමක්වත් නැති UPS පෙට්ටියක් ඇතුලේ NAS එකක් සකසලා දැම්මැයි කිව්වාම. එතකොට රත් වීමේ ප්රශ්ණයක් නැද්ද?
October 6th, 2009 at 11:29 pm
එලම එල වැඩක්. ඇටොම් වලට වඩා අඩු මිල බොර්ඩ් නැතිද(ලoකාවේ)?පොඩි පොඩි වැඩ වලට
October 6th, 2009 at 11:47 pm
@පැතුම්
thanks !
@ගයන්ත
Pen එක අදින්න දෙයක් නෑ, ඒක ඇතුලේ තියෙන්නේ. අනික ඕක මම CF (Compact Flash) එකකට මාරු කරන්න ඉන්නේ.
@බිன்ku
රත්වීමේ ගැටලුවක් නෑ, මොකද Atom CPU එකට Fan එකක් වත් ඕනේ නෑ, විදුලිය බාවිතය 30w වගේ, ඉතින් 250w power supply එනෙක් බාගයක් වත් යන්නේ නැති නිසා රත්වෙන්නෙ නෑ, HDD උනත් මම spin-down කරලා run කරනේ. එක නිසා සවි කරලා තියන fan එක වැඩිත් එක්ක.
@ඉසුරු
නෑ නේ… මම හැම තැනම බැලුවා, හරි වෙලද පොලක් නැති නිසා ගේන්නේ නැතුව ඇතිල්.
October 6th, 2009 at 11:53 pm
විශිෂ්ඨයි නොවැ..
October 7th, 2009 at 4:40 am
වැඩේ නං පට්ට.අති සුපිරියි කියල වැඩක් නෑ.
මට තියන ලොකුම ප්රශ්නෙ තමයි ඊළඟට කාලිංග අයියා මොකක් ඇතුලෙ මොකක් හදයිද කියන එක?
ප.ලි බලාගෙන Synology එකෙන් උස්සයි
October 7th, 2009 at 6:47 am
Media Server එකකයි මෙකෙයි තියෙන වෙනස මොකද්ද
October 7th, 2009 at 7:45 am
එළ නොවැ…. ඒත් වයර් තොගේ දැක්කම පිස්සු වගේ.
October 7th, 2009 at 8:19 am
Kohomada HDD eka spin down karanne?
October 7th, 2009 at 8:29 am
@උදිත ඉසුරංග
ස්තුතියි
@අමිල
හික්… ඒක කියන්න බෑ
@Sahan
Media Server එකක්කුත් මේක ඇතුලේ තියනවා, DAAP/UPnP (DLNA, PS3, Xbox 360) කියන්නේ ඒවා තමයි.
ඉතින් මේකා NAS + Media Server එකක්
@Thilina
මටනම් පොඩි කාලේ ඉදන් එහමයි
වයර් කෑලී පේන්න බෑ.
@Kumara
ඒකට ඇත්තටම HDD එක support කරන්න ඕනේ, උදාහරණයක් ගමු අපි 7200 RPM HDD එකක් ගත්තා කියලා, Spin-Down වලින් කරනේ මේකේ RPM එක අඩු කරන එක හෝ spin වෙන එක නවත්වන එක, ගොඩක් HDD වල සම්මත Power Profile තියන්වා, මෙයින් එකක sleet කරහම හරි. මේක power management වල තියනවා windows නම්, turn off hard disk after X minutes කියලා.
October 7th, 2009 at 9:02 am
UPS කඩා NAS හැදුවා වාගේ!
October 7th, 2009 at 9:03 am
@තිලිණ
කැඩුවේ නෙමෙයි බන්, පරණ UPS එක, අර අකුණු ගහපු එක
October 7th, 2009 at 10:15 am
එළ වැඩක් තමා.මටත් හිතෙනවා හදන්න එකක්. මේ එතකොට වින්ඩෝස් පරිගණකයක ඉදන් workgroup ගියාමද මේක පෙන්නන්නේ?
October 7th, 2009 at 11:30 am
@කසුන්
ඔවු, ඕනේනම් workgroup ගියහම හරි, FTP හරි, නැත්නම් share folders network drive එකක් හැටියට map කරන්න පුලුවන් my computer එකට එන්න.
October 7th, 2009 at 3:00 pm
RAID-1 දැම්මාම ඉඩකඩ අපරාදෙ නැද්ද ? RAID-5 වගේ දැම්මොත් මොකෝ?
October 7th, 2009 at 3:15 pm
@Chanaka
5 දාන්න HDD 4 රක් ඕනේ නේ, ඒක ඉතින් ගොඩක් වියදම් යන වැඩක්, අනික motherboard කේ SATA port 2 කයි තියෙනේ, එහම උනොත් RAID card එකක් දාන්න වෙනවා, ඉඩ මදිකමත් වගේ ගොඩක් දේවල් එනවානේ.
October 7th, 2009 at 3:50 pm
අයියගේ ඊලඟ නිපැයුම මොක්කද දන්නෑ මීනීපෙට්ටියක් ඇතුලෙ මොකක් හරි හැදුවත් පුදුම නෑ
මතක ඇතුව පේටන් එක ගන්න
October 7th, 2009 at 3:59 pm
ආ ඔවුනෙ. HD 2 යි කියල දැක්කෙ දැන්.
මේකෙ තියා ගන්නෙ වැඩිය බරපතල DATA නෙවෙයිනම් RAID-0 දැම්මත් කමක් නැති වෙයි. RAID-1 නම් මට පෙන්නනම බැරි එකක්. Storage Space එකෙන් 1/2 ක් කනවනෙ
October 7th, 2009 at 4:03 pm
@Chanaka
මේකේ තියන දත්ත ටිකක් වැදගත්, ඒකයි RAID-1 ඕනේ, මගේ අනිත් computer backup හා music තියෙන්නේ මේකේනේ, ඉතින් පොඩක් හිත හදාගන්න වෙනවා.
October 8th, 2009 at 9:10 am
මාත් එකක් හදන්න ඕන
October 9th, 2009 at 9:06 pm
හෙහේ… මේක කියෙව්වේ අදනේ !
මරුනෙ අප්පා… ඔයා මාර මාර වැඩකිඩ දානවනේ…..
1TB හාඩ් එකක් දැං 12500ද? ලාබ වෙලානේ…
October 10th, 2009 at 1:47 pm
@කණිෂ්ක
හදමු හදමු
@ඉන්දරේ
දැන් ලාබයි, පිටරටනම් දැන් 1.5TB තියනවා, පොඩක් 1TB ගන්නකොට හොයලා බලන්න RPM 5400 ද 7200 ද කියලා.
October 11th, 2009 at 2:16 pm
Hi Kalinga,
I’m try to make NAS on my old computer.I’ll be using 2 x SATA HDD. I have download free Nas image frm the freenas.org. (FreeNAS-i386-embedded-0.7RC1.4735.img) if i copy this file on USB and if i boot from USB is it able to boot and do the insllation?
Thanx,
Regards,
Janaka Senevirathne
Abu Dhabi – U.A.E
(0502201283)
October 11th, 2009 at 3:57 pm
@Janaka Senevirathne
IMG එක කියන්නේ disk image එකක්, ඒක tool එකක් යොදාගෙන write කරන්න ඕනේ. (linux නම් dd, windows නම් http://m0n0.ch/wall/physdiskwrite.php) නමුත් මේක USB Size එක අනුවත් පොඩක් වෙනස් වෙනවා.
මම නම් recommend කරන විදිය තමයි ISO එක download කරලා, ඒක CD එකකට write කරලා. CD එකෙන් boot කරලා embedded system එකක් ලෙස install කරන එක.
October 15th, 2009 at 11:56 am
වැඩේනම් මරු. හැබැයි තව ටිකක් දවස් යද්දි කාලිංග අයියට හම්බෙන්න මුකුත් තියන්න හම්බෙන එකක් නෑ.
මොකද පිටින් එකක්. ඇතුලෙ තව එකක්.
October 25th, 2009 at 11:57 am
නියමයි නියමයි කලින්ග
October 25th, 2009 at 4:29 pm
CD 1න් boot කරන කොට error msg 1ක් එනවා “Error loading operating system” කියලා.
(FreeNAS-i386-LiveCD-0.7RC1.4735.iso)
October 25th, 2009 at 4:45 pm
@ජානක
check the CD and boot order. maybe your rom 2
October 25th, 2009 at 5:05 pm
1st Boot device 1ක CD rom.second boot device නම් HDD.
October 25th, 2009 at 5:08 pm
@ජානක
guess there is some ting wrong with your CD or CD/DVD-ROM
October 25th, 2009 at 5:27 pm
CD 1ක ගැන තමයි මගෙ නම් අවිස්වාසය.DVD rom 1ක අලුත් SATA drive 1ක්.
ලින්ක් 1ක් දෙන්න පුලුවන්ද FreeNAS ISO 1ක Downලෝඩ් කර ගන්න.මම හිතන්නෙ මගෙ ISO 1ක හරියට වැඩ කැරන්නෙ නැහැ.හරියටම කොයි ISO 1කද බාගන්න ඕනෙ.
October 25th, 2009 at 5:32 pm
@ජානක
Intel නම්
https://sourceforge.net/project/downloading.php?group_id=151951&filename=FreeNAS-i386-LiveCD-0.7RC1.4735.iso&a=19786742
AMD නම්
https://sourceforge.net/project/downloading.php?group_id=151951&filename=FreeNAS-amd64-LiveCD-0.7RC1.4735.iso&a=89710128
මතක තියාගන්න CD එක write කරන්න ඕනේ Disc Image එකක් හැටියට මිස Data CD එකක් හැටියට නොවෙයි.
October 25th, 2009 at 5:56 pm
මේක intel.මමත් download කරේ ඕකම තමයි. ISO Recorder කියන software 1න් cd 1ක burn කර ගත්තෙ.මම හිතන්නෙ මේ වගේ වැඩ පුලුවන් කාලිංග අයියට විතරද කොහෙද?
anyway තව ටිකක් try කරන්නම්කො.
October 25th, 2009 at 6:25 pm
කාලිංග අයියේ මෙන්න FreeNAS boot වෙනෝ. මම CD 1ක burn කලා ආයෙත් Active ISO image file buring software යොදාගෙන.විස්තර කියන්නම් හරියට install කර ගන්න පුලුවන් වුනොත්.
October 27th, 2009 at 4:09 pm
RAID 1 කරද්දි status “stopped” කියල එනවා.Size ‘unknown”ඇයි ඒ?
October 27th, 2009 at 10:39 pm
@ජානක
RAID එක හරියට වැඩ කරනේ නෑ, HDD එක format කරලා නෑ.
October 31st, 2009 at 12:29 am
මෙලෝ හත්තිලව්ව්ක් ෙත්රෙන්නේ නෑ නමුත් හෙිදයි වගේ
October 31st, 2009 at 1:19 pm
oke PSU ekata Surge protection ekak damma nam. baya nathuwa on ekema thiyanna puluwan.
October 31st, 2009 at 10:12 pm
@pavithra
Surge protection දාලා තියෙන්නේ.
November 4th, 2009 at 10:47 am
Bluetooth hari wireless hari karanda berida
November 4th, 2009 at 10:51 am
@Amila
පුලුවන්, WiFi Card එකක් හයි කරන්න, ඒත්, NAS එකක් වගේ එකට හොදම wire lan එකක් තමයි, නැත්නම් speed මදි ලොකු file copy කරනකොට.
November 14th, 2009 at 7:18 pm
ප්රයෝජනවත් ලිපියක් !. FreeBSD සයිට් එකේ ලින්ක් එක පොඩ්ඩක් හදන්න.
November 16th, 2009 at 10:42 pm
kalinga aiya oyage me wadeta asa hitenawa.
thawath oya wage dewal karanna.api asai balanna.
November 30th, 2009 at 12:10 pm
මරැම මරු වැඩක් අප්පා කඩ වල තියෙන වැඩ කරන්න නැති UPS ටිකක් හොයාගෙන පටන්න ගන්න වටිනා වැඩක් ඉක්මනට පේටන්නට එකක් ගත්තත් කමක් නෑ ලංකාවේ ඩන්න බුවාලගෙන් පර්සසම් වෙයන් නැත්නම උඹව විකුණගෙන කාවි
FreeNAS ගැන විස්තර ටිකක් කියන්න පුලුවන්නම් ලොකු දෙයකත්
December 17th, 2009 at 3:42 pm
ela vadak.et Intel Atom 1.6 ratvenava neda.24 hours ekadigta vada karanna puluvanda.
December 17th, 2009 at 4:02 pm
@Amila
ගැටලුවක් නෑ, රත්වෙන්න අඩුගානේ CPU එකට FAN එකක් වත් නෑ, FAN එකක් තියෙන්නේ නොත්බ්රිජ් එකට.
December 27th, 2009 at 2:19 pm
මාර සීන් එකක්නෙ..කරල බලන්න ආසයි ඒත් වෙලාවක් නෑනෙ.
මේ හාඩ් ඩිස්ක් එක රත්වෙන්නෙ නැද්ද?
December 27th, 2009 at 9:54 pm
@අනූ
නෑ, රත්වෙන්නේ නෑ, මොකද මම spin down කරලා දුවන්නේ, අනික 5400RPM නේ. HDD හයි කරලා තියෙන්නේත් තහඩුවකට. රස්සෙන්ත් බෙදිලා යනවා.
මට මේක හදන්න ගියේ පැය 12 වගේ. වැඩි කාලයක් නෑ, එක දවසෙන් වගේ හැදුවා.
December 28th, 2009 at 7:17 am
පට්ට විැඩක්ෙන අයියා. මාව නම් ෙගදරින් පන්නන වැඩක්.
December 28th, 2009 at 9:57 am
@ SooRI
හික්, ඒ මොකද ගෙදරින් පන්නනේ ?
January 14th, 2010 at 10:12 am
can you have multiple HDDs connected and mapped as a single drive?
i’m looking around to buy a NAS … but seems pretty expensive. Your DIY NAS is pretty cool.
January 14th, 2010 at 10:18 am
@Wela
yes you can. just use RAID 1, that will add all drives as one. but if one fail, your out of luck, so use RAID5, you will not get all the drive spaces, but you will get more then 90% and you need 4 dives, you will get space of 3 drives
January 20th, 2010 at 4:13 pm
Whoa! Super job. Gave me an idea to make use of my old computer.
March 21st, 2010 at 6:42 am
This can be made using even old Computer. But minimum RAM 256 else gives error when boot FreeNas.Power consumption may be higher.I used 700MZ AMD processor and 256RM and 3GB HDD for FreeNAS installation. Worked perfectly. Any way UPS concept is interesting.
April 10th, 2010 at 8:58 pm
kalinga iya matath asi oyawage gadget hadanna bareda, eth electronic gana sath5 deyak danne ne. bareda mulasita saralawa keyala denna
May 29th, 2010 at 11:06 pm
is there a way to turn off this? Because this use Hard Disks which can be damaged by turning off the power directly. And i have another question; can i expand it’s capacity by using additional hard disks later
May 31st, 2010 at 11:08 am
@Indika
u can always press the power button, this will automatically power down the FreeNAS, also it will not damage the HDD since its a cold power off. even if the power fail, if there are NO data been witten at that them, no data will be damaged.
yes you can add any amount of HDD’s when your running out of space.
May 31st, 2010 at 9:38 pm
Thanks for the reply kalinga aiya, I was thinking to buy an 1TB external hard disk. But now i want to try this. My PC is having 3 hard disks so that i can remove 2 of them and attach to NAS. It will be an advantage if i able to set up the wireless network which is always in my mind.
June 14th, 2010 at 2:35 pm
I have few hard disks at home from my old comp. But they are already filled with data in NTFS file system. Can FreeNAS use NTFS disks without formatting?
June 14th, 2010 at 4:00 pm
@Indika
Wireless is fine but if your copying lage files, it will take time, even on a new N type network.
@Rakhitha
cant, you need to format.
October 17th, 2010 at 3:12 pm
කියන්න වචන නෑ ඹයා හැබෑ වැඩ්ඩෙක්. Hdd වල 5400Rpm 7200Rpm වෙනස මෙකක්ද?
October 18th, 2010 at 2:49 pm
@Subash
RPM කියන්නේ (Revolutions per minute) විනාඩියකට කැරකෙන වට ගනන. මේ මෙකෙන් කියන්නා HDD එකක් ඇතුලේ තියන Data Plates කැරකෙන වේගය. මෙම වේගය වැඩි වෙනකොට දත්ත කියවන්න/ලියන්න යන කාලය අඩු වෙනවා. නමුත් ඒ එක්කම රස්නය, සද්ද, විදුලි පරිබෝජනය වගේ දේවල් වැඩි වෙනවා.
October 22nd, 2010 at 4:38 pm
තව ප්රශ්ණයක් තියනවා. raid1 න් කරද්දි එක සමාන ධාරිතාව තියෙන HDD දෙකක් ඕනෙද නැත්තන් Different disk space තියෙන දෙකක් සම්බන්ධ කරන්න පුළුවන්ද? ආ තව hdd format කරන්න freenas එකෙන් පුලුවන්ද නැත්තන් අපි format කරන්න ඕනෙද? අපි කරනවානම් file system එක කොහොම දාලා format කරන්න ඕනෙද කියනවද (ඒ කියන්නෙ ntfs or fat32 නැත්තන් වෙනම එකක්ද කියලා). ගොඩක් ස්තූති වෙන්න ඕනෙ මේ වගේ එකක් කියලා දුන්නට. නැත්තන් අපි කොහෙන් මේවා දැන ගන්නද….
October 23rd, 2010 at 10:06 am
@Subash
can. for RAID1 you dont need same size HDD’s but the max size of the RAID1 size will be the same as the smallest dive size you have.
you don’t have to format, you can use freenas web interface to do that. but freenas don’t support ntfs, fat32 supported but not recommended. use the recommended file system
November 21st, 2010 at 10:04 am
කාලිංග අයිය. මමත් මේ වැඩේ කරන්නයි බැලුවෙ.NAS එකට පාවිච්චි කරන machine එක Dell Dimension 4100 ,1GHz, 256RAM,160GB IDE hard disk එකක් හයිකලා. network switch එකක් නැතිව crossover cable එකකින් connection එක හදාගන්න පුළුවන් වෙයිද.. “මේක ඉදන් torrent download කරන්න උවද පුලුවන්” කියන එකේ තේරුම මට පැහැදිලි නෑ
November 21st, 2010 at 10:31 am
පුළුවන්
cross cable එකක ගැහුවා කියනේ PC එක හැම තිස්සෙම ඕන එක තියන්න ඕනේ නේද ?
ඒ කියනේ 3rd party sofware දල torrent download කරන්න හදාගන්න පුළුවන් FreeNAS වල
January 20th, 2011 at 12:32 am
Kalinga,
.
Really great work.
But I didnt get what you said as answer to the last question by “Nisanka”
We anyway have to keep this NAS pc power on right?
If we are going to access this wireless, we have to connect this to a wireless router through a Rj45 jack, right? is there any other way to share files other than using a switch/router?
Also need to know about the power on switches and how you soldered the RJ 45 to the UPS port. Since UPS might not have connector wires such as what we found in a computer cases(fromt side connectors), do you just connect the two wires coming from the power on button to the motherboard pins? for the rj45, you just cut the wire and soldered the small separate wires inside to the UPS rj 45 port?
(FYI – My electronic knowledge is very little)
Suba Dawasak,
January 23rd, 2011 at 9:49 am
@Chinthaka
if your using it, then yes
yeap,
use a direct cross cable from the NAS to your PC
that you need some knowledge in electronic, since you need to find witch pins on UPS connect to and make sure you dont short-out
yes
but you have to make sure what pint connect to what wire, else it will not work.
January 23rd, 2011 at 10:52 am
Thank you Kalinga.
.
Seems like I have to get some more knowledge about electronics before actually try something like this out. Hope google will rescue me
July 8th, 2011 at 2:46 am
ayye mata danaganna one meekata internet speed ekata set karaddi kochchara speed ekak thiyenne oneda
e kiyanne mama gedara hadala mata 100km walin wagee meke details balanna share karanna puluwanda ehema karanna net speed eka keeyak withara thiyenna oneda ?:)
July 10th, 2011 at 7:12 pm
@Nipunalanka
ඒක ඉතින් වැඩිවෙන තරමට speed එක වැඩියි. ස්පීඩ් අඩුවන් file transfer වෙන්න යන කාලය වැඩියි.
August 5th, 2011 at 11:39 pm
niyama wadak,bt install karana eka poddak aphadili
August 22nd, 2011 at 10:30 pm
IDE to SATA කාඩ් එකක් use කලොත් SATA නැති machine එකක මේ වැඩේ කරගන්න පුළුවන් වෙයිද ?
November 25th, 2011 at 9:31 am
mata audio streaming server ekak hadana ona…eka hadana hati mula idala podak pahadili karanna puluwanda ?…{mage i5 laptop ekak use karala ekak hadaganna puluwanda?}
March 20th, 2012 at 12:51 pm
ලොවෙත් නෑ වෑඩෙ නම් මරු
April 21st, 2012 at 4:41 pm
කාලිංග අයියේ NAS 1ට virus පශ්ණයක් නැද්ද?
March 30th, 2013 at 2:27 pm
නියමයි කාලිංග අයියේ……..ගොඩක් සතුටුයි මේ වගේ දේවල් කියල දෙනවට…